Buy Low Price From Here Now
Rotary Replacement Belt for 954-0101A / 754-0101A
Snow Thrower Belt
and
AMF/DYNAMARK/NOMA 42132 ,
BOLENS 110-8468 ,
BOLENS 172-2639 ,
BOLENS 172-4729 ,
BOLENS 173-3152 ,
BOLENS 173-3439 ,
BOLENS 173-3770 ,
LAMBERT 4-1030 ,
LAWNBOY 608014T ,
MERRY TILLER 48350 ,
MTD 754-0101A ,
MTD 754-0193 ,
MTD 754-0235 ,
MTD 954-0101A ,
MTD 954-0193 ,
MTD 954-0235 ,
PENNEY'S 4-40910 ,
PRIME LINE 7-4H350 ,
ROTO-HOE 4075 ,
S & H MANUFACTURING 303 ,
SILVER STREAK 75-148 ,
SILVER STREAK 75-435 ,
SILVER STREAK 75-735 ,
STENS 248-035 ,
STENS 265-433 ,
STENS 271-502 ,
SUNBELT B1MT88 ,
SUNBELT B1SB5068 ,
TORO/WHEEL HORSE 19-6960 ,
TORO/WHEEL HORSE 7-0737,
Readmore
Technical Details
- Premium Belts made by RotarySee more technical details
By DJA (Pittsburgh, PA USA)
The title says it all. I priced the MTD belt at a local big box and it was more than twice the cost of this. This part appears to be of equal quality so I'm happy to keep the savings.
By H. Won (Michigan)
This belt is generic 0.5"X35" V-belt, which you can easily buy equivalent belt at ACE hardware. The problem is that the generic belt does not work for MTD single stage snow thrower. Single stage thrower uses the belt as a slip clutch & auger brake. Original MTD belt has more fabric than rubber at the friction surface to aid slippage when the auger drive bail is not pulled. But generic V-belt has more rubber because usually V-belt is not for slippage.
So, after a short uses (in my cases, about 4 hours), the belt wears quickly at one spot when the auger drive bail is not pulled.
Another problem is that the auger does not stop effectively. Because the friction at the engine pulley is so great, the belt keeps rolling even when the auger drive tension is released and brake is engaged. This is a safety issue.
In conclusion, don't buy this belt for MTD(Troy-Bilt, etc.)single stage snow thrower. I will check Lowe's if they sell the genuine MTD belt for less than MTD parts online.
By J. Yeagley (Northern Ohio)
I have a Troy-Bilt, but there are obviously many brands that change the color of the plastic and sell it as their own. The owner's booklet listed the belt part number, I found it here on Amazon for about half the price of a local purchase.
After reading my booklet further, I found there was an adjustment to the cable that engages the blower, so I made this adjustment and now this belt is my spare. You might want to check if your machine has 2 holes in the lever on the handle like mine. It took all of 30 seconds to move the cable to the other hole!
Still wouldn't hurt to have a belt when you're ready for it, though.
Images Product
Buy Rotary Replacement Belt for MTD #954-0101A / 754-0101A Now
0 comments:
Post a Comment